Pioneer KURO PDK-TS36B User Manual

Page of 82
6
En
Forward/Backward Angle of Inclination Adjustment Mechanism
On this stand, you can adjust the angle of inclination of the 
Pioneer television within a range of approximately 2° forward 
or backward according to your preference.
 œÌi
• Be sure to adjust the angle only after you have 
attached the Pioneer television.
• Be sure to install it on a flat table or other flat 
surface.
• Be sure to hold the top of the Pioneer television 
with your hand while adjusting the angle.
Adjustment Procedure
1
  Loosen the forward/backward inclination 
anchor bolts using the enclosed C wrench ( 
locations on the left and right).
 
While being sure to hold the top of the Pioneer television 
with your hand, loosen the forward/backward 
inclination anchor bolts
 on the left and right sides by 
rotating them upwards using the enclosed C wrench.
'PSXBSECBDLXBSE
JODMJOBUJPOBODIPSCPMU
-PPTFOJOH
2
  Set the angle you prefer.
 
Set the angle you prefer by slowly moving the Pioneer 
television.
  
 œÌi
 
While adjusting the angle, be very careful to keep your 
hands out of the place indicated by the arrow on the 
figure.
3
  Tighten the forward/backward inclination 
anchor bolts ( locations on the left and 
right).
 
Firmly tighten the forward/backward inclination 
anchor bolts
 on the left and right sides by rotating them 
downward using the enclosed C wrench. 
Be sure to hold the top of the Pioneer television with your 
hand until you have fully tightened the bolts.
'PSXBSECBDLXBSE
JODMJOBUJPOBODIPSCPMU
5JHIUFOJOH
4
  Check once more to make sure that the 
forward/backward inclination anchor bolts 
are fully tightened.
PDK-TS36B_AZR1279B.indb   6
2008/07/07   9:32:33