Pioneer SC-1525-K User Manual

En

A USB memory device is not 
recognized.

The USB memory device does not support the 
mass storage class specifications.

Try using a USB memory device compatible with 
the mass storage class specifications. Note that 
there are cases where even the audio files stored 
on a USB memory device compatible with the 
mass storage class specifications are not played 
back on this receiver (page 44).

Connect the USB memory device and switch on 
this receiver (page 35).

A USB hub is currently being used.

This receiver does not support USB hubs 
(page 44).

This receiver recognizes the USB memory device 
as a fraud.

Switch off and on again this receiver.

A USB memory device is 
connected and displayed, but 
the audio files stored on the 
USB memory device cannot 
be played back.

Some formats of USB memory devices, including 
FAT 12, NTFS, and HFS, cannot be played back on 
this receiver.

Check whether the format of your USB memory 
device is either FAT 16 or FAT 32. Note that the FAT 
12, NTFS, and HFS formats cannot be played back 
on this receiver (page 44).

The file format cannot be properly played back on 
this receiver.

See the list of file formats that can be played back 
on this receiver (page 45).

Cannot detect USB keyboard. The USB keyboard is routed through a USB hub. This receiver is not compatible with USB hubs. 

Plug the keyboard directly into the receiver.

A PS2 keyboard is routed through a PS2/USB 
connector.

PS2 keyboards cannot be used with this receiver, 
even if routed through a PS2/USB connector. Use 
a USB keyboard.

Keyboard is not a USB HID Class device.

Some devices will not be detected. Use a USB HID 
Class keyboard.

Cannot enter correct text 
using the USB keyboard.

Keyboard is not US-international layout keyboard. Use a US-international layout keyboard. NB: 

Some characters cannot be entered.

Cannot access the network.
(“Connection Error” shows in 
the display.)

The LAN cable is not firmly connected.

Firmly connect the LAN cable (page 33).

The router is not switched on.

Switch on the router.

The network device was switched on when this 
receiver was already on.

Switch the network device on before the receiver.

Cannot listen to Internet radio 
stations.
(“Connection Error” shows in 
the display.)

The firewall settings for components on the 
network are currently in operation.

Check the firewall settings for components on the 
network.

You are currently disconnected from the Internet. Check the connection settings for components on 

the network, and consult with your network 
service provider if necessary (page 87).

The URL for the Internet radio station is 
incorrectly programmed.

Check that the URL was correctly entered when 
programming.

The broadcasts from an Internet radio station are 
stopped or interrupted.

Broadcasts may be interrupted or suspended by 
the radio station.

An Internet radio station is selected whose 
protocol this receiver does not recognize.

This receiver does not recognize protocols other 
than ‘http’ and ‘mms’.

An Internet radio station had closed or moved.

Enter new internet radio station on the Internet 
Radio Setup.

Cannot listen to Internet radio 
stations. (“File Format Error” 
shows in the display.)

Broadcast is in a format not compatible with this 
receiver.

This receiver cannot play audio in formats other 
than MP3 or WMA. Also, even if they are MP3 or 
WMA formats, this receiver may not be able to 
play back.

SC-1525_UXJCB.book  100 ページ  ２０１０年４月２０日　火曜日　午後７時３２分