Pioneer SC-1525-K User Manual
Connecting your equipment
03
31
En
Connecting additional amplifiers
This receiver has more than enough power for any home
use, but it’s possible to add additional amplifiers to every
channel of your system using the pre-outs. Make the
connections shown below to add amplifiers to power
your speakers.
use, but it’s possible to add additional amplifiers to every
channel of your system using the pre-outs. Make the
connections shown below to add amplifiers to power
your speakers.
• You can use the additional amplifier on the surround
back channel pre-outs for a single speaker as well. In
this case plug the amplifier into the left (L (Single))
terminal only.
this case plug the amplifier into the left (L (Single))
terminal only.
• The sound from the surround back terminals will
depend on how you have configured the Speaker
system setting on
system setting on
page 85.
• To hear sound only from the pre-outs, switch the
speaker system to OFF, or simply disconnect any
speakers that are connected directly to the receiver.
speakers that are connected directly to the receiver.
If you’re not using a subwoofer, change the front speaker
setting (see Speaker Setting on page 85) to LARGE.
setting (see Speaker Setting on page 85) to LARGE.
Connecting AM/FM antennas
Connect the AM loop antenna and the FM wire antenna
as shown below. To improve reception and sound quality,
connect external antennas (see Connecting external
antennas on
as shown below. To improve reception and sound quality,
connect external antennas (see Connecting external
antennas on
page 32).
1
Pull off the protective shields of both AM antenna
wires.
2
Push open the tabs, then insert one wire fully into
each terminal, then release the tabs to secure the AM
antenna wires.
antenna wires.
3
Fix the AM loop antenna to the attached stand.
To fix the stand to the antenna, bend in the direction
indicated by the arrow (fig. a) then clip the loop onto the
stand (fig. b).
indicated by the arrow (fig. a) then clip the loop onto the
stand (fig. b).
• If you plan to mount the AM antenna to a wall or other
surface, secure the stand with screws (fig. c) before
clipping the loop to the stand. Make sure the
reception is clear.
clipping the loop to the stand. Make sure the
reception is clear.
4
Place the AM antenna on a flat surface and in a
direction giving the best reception.
5
Connect the FM wire antenna into the FM antenna
socket.
For best results, extend the FM antenna fully and fix to a
wall or door frame. Don’t drape loosely or leave coiled up.
For best results, extend the FM antenna fully and fix to a
wall or door frame. Don’t drape loosely or leave coiled up.
AL
OPTICAL
ASSIGNABLE
ASSIGNABLE
IN
1
(TV/SAT)
IN
2
(DVR/BDR)
IN
OUT
FRONT
CENTER SURROUND SURR BACK
(Single)
FH/FW
3
(VIDEO)
IN
2
(CD)
IN
3
(CD-R)
SUBWOOFER
/100)
(OUTPUT 5 V
100 mA MAX)
100 mA MAX)
ADAPTER PORT
PRE OUT
XM
IN
FRONT
CENT
SUBWO
TION:
R IMPEDANCE 6
Ω - 16 Ω .
NTION:
E D'IMPEDANCE DE 6
Ω - 16 Ω .
SURROUND BACK
(Single)
L
R
L
SURROUND
R
L
ANALOG
INPUT
R
L
ANALOG
INPUT
R
L
ANALOG
INPUT
ANALOG
INPUT
ANALOG
INPUT
R
L
ANALOG
INPUT
Powered
subwoofer
subwoofer
Front channel
amplifier
amplifier
Center channel
amplifier (mono)
amplifier (mono)
Surround
channel amplifier
channel amplifier
Surround back
channel amplifier
channel amplifier
Front height or
Front wide
channel amplifier
Front wide
channel amplifier
ANTENNA
FM UNBAL 75
AM LOOP
3
1
4
fig. a
fig. b
fig. c
5
2
SC-1525_UXJCB.book 31 ページ ２０１０年４月２０日 火曜日 午後７時３２分