Pioneer SC-1525-K User Manual

En

If you selected Speaker B at Speaker system setting on 
page 85, you can switch between speakers using the 
SPEAKERS button. If you selected Normal(SB/FH), 
Normal(SB/FW), Front Bi-Amp or ZONE 2, the button 
will simply switch your main speaker terminals on or off. 
The options below are for the Speaker B setting only.

1

speaker system setting.
As mentioned above, if you have selected Normal(SB/
FH) or Normal(SB/FW), the button will simply switch 
your main speaker terminal (A) on or off. 

Press repeatedly to choose a speaker terminal option:

• SP

A – Sound is output from the A-speaker 

terminals (up to 7 channels (including surround back 
channels), depending on the source).

• SP

B – Sound is output from the two speakers 

connected to the B-speaker terminals. Multichannel 
sources will not be heard.

• SP

AB – Sound is output from the A-speaker 

terminals (up to 5 channels, depending on the 
source), the two speakers connected to the B-
speaker terminals, and the subwoofer. The sound 
from the B-speaker terminals will be the same as the 
sound from the A-speaker terminals (multichannel 
sources will be downmixed to 2 channels).

• SP

 (off) – No sound is output from the speakers.

The following steps use the front panel controls to adjust 
the sub zone volume and select sources. See MULTI-
ZONE remote controls on 

page 64.

Each press selects a MULTI-ZONE option:

• ZONE 2 ON – Selects your primary (ZONE 2) sub 

zone

• ZONE 2&3 ON – Select both sub zones

• ZONE 3 ON – Selects your secondary (ZONE 3) sub 

zone

• MULTI ZONE OFF – Switches the MULTI-ZONE 

feature off

The MULTI-ZONE indicator lights when the MULTI-ZONE 
control has been switched ON.

select the sub zone(s) you want.
If you selected ZONE 2&3 ON above, you can toggle 
between ZONE 2 and ZONE 3.

a.If the video picture deteriorates when this settings is switched ON, 

switch it OFF.

b.• When set to a resolution with which the TV (monitor) is not 

compatible, no picture is output. Also, in some cases no picture will 
be output due to copyright protection signals. In this case, change 
the setting.
• When AUTO is selected, the resolution is selected automatically 
according to the capacity of the TV (monitor) connected by HDMI. 
When PURE is selected, the signals are output with the same 
resolution as when input (see About the video converter on page 22).
• If this is set to something other than AUTO, PURE and 480i/576i 
analog signals are input, 480p/576p signals are output from the 
component output terminals.
• When 1080/24p is selected, depending on the source material the 
movement may be unnatural or the picture may not be clear. In this 
case, set the resolution to something other than 1080/24p.
• 1080/24p is mainly effective for movie source materials.

c.• If the image doesn’t match your monitor type, adjust the aspect 

ratio on the source component or on the monitor.
• This setting is only displayed when 480i/p or 576i/p video signals 
are being input.

d.This setting is only displayed when the video signals below are 

being input:
• 480i, 576i, 480p, 576p, 720p, 1080i analog video signals
• 480i, 576i, 480p, 576p, 720p, 1080i, 1080p, 1080p24 HDMI video 
signals

e.• This setting is valid for component outputs and HDMI output.

• This setting have the effect only for pictures recorded in the 
interlaced scan format (480i/576i or 1080i signals).
• P.MOTION is disabled when PCINEMA is set to ON.

f. You can’t use this setting when the HDMI or component video 

signals are  being input.

1 • The subwoofer output depends on the settings you made in Manual speaker setup on page 84. However, if SP

B is selected above, no sound 

is heard from the subwoofer (the LFE channel is not downmixed).
• All speaker systems (except Speaker B connections) are switched off when headphones are connected.

SC-1525_UXJCB.book  63 ページ  ２０１０年４月２０日　火曜日　午後７時３２分