Pioneer Blu BDP-31FD User Manual

If the player displays the following symptoms, press and hold in 

 STANDBY/ON on the player’s front panel to reset the 

player.
– Operation buttons do not work
– Noise is output
– Power does not turn off
When “RESET” appears on the front panel display, the player is reset and the power turns off. Turn the player’s power back 
on.
When the power is turned on, it may take several minutes for system checking to be completed.
Since all settings including the language setting stored in memory are also reset when a reset has been performed, they must 
be set again.
When the problem persists even after performing a reset, unplug the AC cord and plug it in again. If this does not solve the 
problem, contact the nearest service center approved by Pioneer.

•

•
•

•

The following messages appear on the TV screen in case the disc you tried to playback is not appropriate or the 
operation is not correct.

Cannot play.

The disc cannot be played back with 
this Player.

•

Check the disc, and load it correctly.

•

Incompatible disc.

A disc that cannot be played is loaded 
in the player.
The disc is scratched or dirty.
The disc is loaded with the printed 
side facing down (the disc tray opens 
automatically).

•

•
•

Occurs if the loaded disc cannot be 
played because it is a non-standard disc 
or scratched, etc.

•

Remove the disc.

•

Cannot operate.

Occurs if an operation is incorrect.

•

—

This USB memory is not formatted 
properly. Please format the memory in 
USB memory management.

Occurs if there is a formatting error.

•

Format the USB memory again.

•

The Connected USB Memory cannot 
be used. It should be compliant with 
USB 2.0.

Occurs if USB memory not compliant 
with USB 2.0 High Speed (480 Mbit/s) is 
used (i.e. USB 1.0/USB 1.1).

•

Connect USB 2.0 High Speed (480 
Mbit/s) compliant USB memory.

•