Pelco pelco time-lapse vcr c649m User Manual
Pelco Manual C649M (7/99)
27
PB HEAD
Sets the heads for playback. When you turn the JOG dial to the
SELECT
right, the display switches in the following order: NORMAL, L/
L (left/left), R/R (right/right), AUTO, NORMAL. The default is
NORMAL.
L (left/left), R/R (right/right), AUTO, NORMAL. The default is
NORMAL.
The VCR has two pairs of SP (standard play) heads. Some
VCRs make time-lapse recordings using same-azimuth heads,
which are not VHS compatible. Playback of such tapes with the
NORMAL setting will have picture/noise with a 30 Hz flicker, or
just noise. For proper playback, adjust the setting to AUTO, or
set to L/L or R/R. One setting will give normal play. After playing
a tape with L/L or R/R settings, return the setting to NORMAL.
VCRs make time-lapse recordings using same-azimuth heads,
which are not VHS compatible. Playback of such tapes with the
NORMAL setting will have picture/noise with a 30 Hz flicker, or
just noise. For proper playback, adjust the setting to AUTO, or
set to L/L or R/R. One setting will give normal play. After playing
a tape with L/L or R/R settings, return the setting to NORMAL.
BUZZER
Sets the conditions for which the buzzer sounds. The default is
WRNG.
WRNG.
•
WRNG – The buzzer sounds when there is any malfunc-
tion in the VCR.
tion in the VCR.
•
WRNG•TAPE END – The buzzer sounds when there is
any malfunction in the VCR or at the tape end.
any malfunction in the VCR or at the tape end.
•
WRNG•REMAIN – The buzzer sounds when there is any
malfunction in the VCR or when the tape (T-120 or T-160)
has about three minutes left in 2H mode.
malfunction in the VCR or when the tape (T-120 or T-160)
has about three minutes left in 2H mode.
•
OFF – The buzzer does not sound.
TIME DATE
Sets the time, date, and Daylight Savings setting. Section
ADJUST
6.10.1 provides an explanation while Section 6.10.2 provides a
procedure.
procedure.
6.10.1 Day and Time Display Modes
DISPLAY MODE 1
1.
Month-Day-Year
2.
Hour:Minute:Second
3.
Daylight Savings Time symbol or power failure symbol
4.
Alarm recording number
•
A 24-hour display is used: 00:00 indicates midnight; 12:00, noon; and
15:00, 3 p.m.
15:00, 3 p.m.
•
An alarm recording number is displayed during alarm recording.
DISPLAY MODE 2
1.
Month-Day-Year
2.
Day of the week
3.
Alarm recording number
4.
Hour:Minute:Second
5.
Daylight Savings Time symbol or power failure symbol
6.
Recording mode
•
A 24-hour display is used: 00:00 indicates midnight; 12:00, noon; and
15:00, 3 p.m.
15:00, 3 p.m.
•
The day of the week is automatically set.
•
An alarm recording number is displayed during alarm recording.
Figure 16.
Display Mode 1
Figure 17.
Display Mode 2
01-01-97 00:00:00
A0001
1
2 3 4
5 6
01-01-97 WED A0001
00:00:00 L18
1
2 3
4