Manualsbrain.com
  1. Manuals
  2. Brands
  3. Pelco
  4. ExSite Series Explosionproof Positioning System C1300M-C (11/08)
  5. User Manual

Pelco ExSite Series Explosionproof Positioning System C1300M-C (11/08) User Manual

Download
Page of 48
16
C1300M-C (11/08)
Unit Settings
CAMERA
TYPE OF LIGHTING
Pelco has calibrated settings that optimize the white balance, and the picture, for multiple lighting 
conditions; settings differ depending upon the model.  
There are two types of lighting settings for 22X models:
T1 (default)
For use in outdoor applications.
T2
For use in indoor applications.
There are three settings for 23X models:
T1 (default)
For use in outdoor applications.
T2
For use in indoor applications.
T3
For use in applications that use sodium lighting.
AUTO FOCUS
Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.
There are two auto focus settings:
ON (default) 
If auto focus mode is set to ON, the camera will focus 
automatically when using pan, tilt, and zoom functions. 
Off
Focus is operated manually. To focus, press the Focus Far or Focus 
Near button on the controller.
ZOOM LIMIT
Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The following are 
the zoom limit settings for the ExSite Series systems:
23X Day/Night Camera
Camera zooms optically to 23X and then zooms electronically. 32X, 
92X,184X, or 230X. Default setting is 184X.
22X Color Camera
Camera zooms optically to 22X and then zooms electronically. 22X, 
32X, 88X, 176X, 220X, or 264X. The default setting is 176X.
ZOOM SPEED
Zoom speed allows the user to define how fast the dome will go from full wide zoom to the 23X 
optical zoom. The default setting is MEDIUM.
Available settings for zoom speed include the following:
22X COLOR
23X DAY/NIGHT
HIGH 2.4 
seconds
2.9 
seconds
MEDIUM (default) 
3.9 seconds
4.2 seconds
LOW 6.3 
seconds
5.8 
seconds
NOTE:  When using the HIGH setting, the image may be out of focus until zooming stops.
LOW LIGHT LIMIT
Low light limit is the maximum duration, in fractions of a second, that the electronic shutter will 
remain open in low light conditions. The default setting is 2.
Settings include the following:
2 = 1/2 second 
8 = 1/8 second
30 = 1/30 second
4 = 1/4 second
15 = 1/15 second
60 = 1/60 second
EXIT
LANGUAGE  
ENGLISH
UNIT INVERSION  
OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
UNIT SETTINGS
TYPE OF LIGHTING  
T1
AUTO FOCUS  
ON
ZOOM LIMIT  
X184
ZOOM SPEED  
MEDIUM
LOW LIGHT LIMIT  
2
IR CUT FILTER* 
AUTO
  AUTO IR LEVEL*  
DUSK
<ADVANCED SETTINGS>
BACK
EXIT
CAMERA
 * Available only with the 23X day/night camera.