Pelco Active Receiver TW3008AR-4 User Manual

Page of 16
C1668M (8/06)
5
Description
The TW3008AR-4 is an eight-channel active receiver that can receive live video over unshielded 
twisted pair (UTP) cable.  
The adaptive technology in the TW3008AR-4 automatically adjusts the low, medium and high 
frequency components of the video signal allowing for the best possible video transmission. The 
adaptive technology eliminates the need for manual adjustment by automatically adjusting to provide 
the most favorable video transmission depending on cable length needed. The unit has been 
optimized for use with Cat5e and Cat6 cable, although Cat3 and Cat5 cable can be used for shorter 
distances.
The front of the receiver has dials and LEDs for each of the eight channels. The dials are used for 
selecting the cable distance. You can leave the dial on auto (default adaptive technology) or manually  
select 1,000 feet (305 meters), 2,000 feet (610 meters), 3,000 feet (914 meters), or 4,000 feet 
(1,219 meters). The LEDs light green when UTP video is being received and red when no UTP video is 
being received. A flashing amber LED means that there are Coaxitron
®
 pan/tilt/zoom (PTZ) control 
commands being transmitted. 
The back of the receiver has four BNC connectors for each channel and one UTP connector for each 
channel. Only BNC A of each channel can be used for Coaxitron control. The other BNC connectors are 
for connecting to other equipment, such as monitors and DVRs. The back of the unit also has a 5 mm 
barrel power connector and a 6-pin Molex
®
 power connector. The barrel connector is for desktop use 
and the 6-pin Molex connector can be used in a multi-unit installation with the optional 
EPS5000-120TW rack-mountable external power supply.
Customers in the United States, United Kingdom, Europe, and Australia will receive one of the 
following power cords: US-320-C13, UK-320-C13, EU-320-C13, and AU-320-C13. 
The following features are found on the TW3008AR-4:
Full motion color/black-white video up to 4,000 feet (1,219 meters) with Cat5e or Cat6
Supports Coaxitron control (PTZ control signals) up to 750 feet (229 meters)
Compatible with all Pelco twisted pair equipped cameras, enclosures, and domes
Built-in surge suppression
Each channel has four BNC connectors for video output
Easy termination with a removable UTP connector for each channel
Supports NTSC, PAL, and SECAM
Power supply with an IEC 320-C13 socket for interchangeable AC power cords (either US, UK, 
EU, AU)
Can be mounted into a standard EIA 19-inch rack
MODELS
TW3008AR-4-US
Eight-channel active receiver with power cord for use in the United States
TW3008AR-4-UK
Same as TW3008AR-4-US except with power cord for use in the United 
Kingdom, Ireland, and Hong Kong
TW3008AR-4-AU
Same as TW3008AR-4-US except with power cord for use in Australia and New 
Zealand
TW3008AR-4-EU
Same as TW3008AR-4-US except with power cord for use in most of 
continental Europe