Pelco Active Receiver TW3008AR-4 User Manual

C1668M (8/06)

9

You can connect the TW3008AR-4 active receiver to transmitters, such as the TW3001P passive 
transceiver, TW3001AT active transmitter, and CC3710/CC3610 UTP cameras. Although you can 
connect these products using an unshielded twisted pair Cat3 and Cat5 cable, Cat5e and Cat 6 are 
recommended for the best video performance.

Always connect the UTP wires on the Cat cable from + to + and from – to –. For example, if you connect 
the blue wire to the + on the TW3008AR-4 make sure you connect the other end of the blue wire to 
the + on the transmitter.

Table A shows the maximum cable distance with Coaxitron or video only when connecting the 
TW3008AR-4 to a TW3001P passive transceiver with a particular type of Cat cable. 

Table B shows the minimum size for single wire and stranded wire.

Figure 4 shows a TW3008AR-4 connected to a UTP Camclosure

®

.

Figure 4.  TW3008AR-4 Connected to a UTP Camclosure

Table A.  Cable Distance with TW3001P

Cat3

e

750 ft (229 meters)

1,500 ft (457 meters)

Cat5

e

750 ft (229 meters)

3,000 ft (914 meters)

Cat5e

750 ft (229 meters)

4,000 ft (1,219 meters)

Cat6

e

750 ft (229 meters)

4,000 ft (1,219 meters)

Table B.  Wire Gauge

Single Wire (solid)

24 AWG (0.25 mm

2

)

Stranded Wire (flexible)

24 AWG (1.0 mm

2

)

CAMCLOSURE

MONITOR

MONITOR

MONITOR

MONITOR

BLUE WIRE =

=

GRAY WIRE 

UTP

TW3008AR-4

12 VDC 
UNIVERSAL 
POWER 
SUPPLY

US
EU

UK

AU