Pelco PelcoNet Multimedia Transmission Via Network Net350 User Manual
84
C2907M-D (4/05)
CONNECTING A PELCONET TRANSMITTER TO THE CM6800 ASCII PORT
Refer to the transmitter portion of Figure 63. This configuration lets an operator view and control cameras with a PC using a web browser. (The
operator’s PC is not shown on the diagram.) All settings are done in the CM6800 manager program or through a CM6800 menu. Note the
following:
operator’s PC is not shown on the diagram.) All settings are done in the CM6800 manager program or through a CM6800 menu. Note the
following:
•
Port 2 defaults to ASCII and RS-232.
•
Ports 7 and 8 can be set to ASCII and RS-232 by using the CM6800 manager program (refer to Figure 63) or by using a CM6800 menu (refer
to Figure 60).
to Figure 60).
•
Pelco recommends using Port 2.
Figure 61. Manager Screen
Figure 62. Menu Screen
SET SERIAL PORT 07
DEVICE: ASCII
TYPE: RS232
BAUD RATE:
9600
PARITY: ODD
DATA BITS:
8
STOP BITS:
1
RETURN