Samsung WM-202 User Manual

Should you wish to use your radio for DAB reception in a new location, 
or if no stations were detected during the initial scan, you can follow this 
procedure to allow your radio to fi nd out which DAB radio stations are 
available.

1.  Ensure that the telescopic antenna is extended, and then press the 

Mode button as needed to select DAB mode.

2.  Once in DAB mode press the Menu button.

3. Rotate 

the 

Tuning/Select control until 'Local scan' is highlighted on 

the display.

4. Press 

the 

Tuning/Select control to initiate the scan. The display will 

show 'Scanning' and your radio will perform a scan of the UK DAB 
frequencies. As new stations are found the station counter will increase 
and stations will be added to the list. The bar graph indicates the 
progress of the scan.

5.  To carry out a full scan of the entire DAB band III frequencies rotate the 

Tuning/Select control until 'Full scan' is highlighted on the display.

6. Press 

the 

Tuning/Select control to initiate the scan. The display will 

show 'Scanning'. As new stations are found the station counter on the 
right hand side of the display will increase and stations will be added 
to the list. The bar graph indicates the progress of the scan. 

 

Due to the larger number of DAB channels scanned, the full scan will 
take longer than the local scan.

3-6

2

1