Samsung WM-202 User Manual

Your radio will normally update the clock automatically when connected to 
the internet. If you enter a time setting manually, the radio will calculate a 
local time offset so that whenever it synchronises using the internet, the 
correct local time is stored in the radio. In the event of a power failure, 
your radio will connect to the internet and then set the clock automatically 
based on this information.

You may wish to use the radio away from the internet, in which case you 
may specify that the radio sets its clock from DAB or FM radio broadcasts. 
After a power failure the radio will then set its clock the next time that you 
turn on the radio in DAB or FM mode.

Alternatively you may specify that the time is not automatically updated. 
In this case the clock must always be set manually after a power 
interruption.

1.   With your radio switched on, press the Menu button to access the 

menu for the current mode. 

2. Rotate 

the 

Tuning/Select control until 'System settings' is highlighted 

on the display. Press the control to enter the system settings menu.

3. Rotate 

the 

Tuning/Select control until 'Time/Date' is highlighted on 

the display. Press the control to enter the time setup.

4. Rotate 

the 

Tuning/Select control until 'Auto update' is highlighted on 

the display. Press the control to enter the auto-update menu.

5.   Rotate the Tuning/Select control to choose an update option from 

'Update from DAB', 'Update from FM', 'Update from Network' or 
'No update' as required. Press the control to confi rm your choice. The 
radio will then exit to the previous menu display.

2-5

1