Pelco Computer Keyboard KBR960 User Manual

42

C1519M-C (8/05)

You can also control multiplexers with the KBD960 keyboard. You can connect
multiplexers to any input.

Refer to the CM6800 Installation/Operation Manual (C1515M) for instructions on
setting the multiplexers for keyboard control.

Follow these steps to control multiplexers:

1.

Enter a MUX input number and press 

. Each MUX input is associated

with a camera input. Figure 43 shows MUX 1 being controlled.

2.

Select 

. MUX Menu 1 appears. 

 should be highlighted, which

means you have MUX control.

3.

Cycle through the 16 picture inserts (if you have a 16-channel multiplexer)

by entering the camera number and selecting 

.

4.

Select 

 again to zoom into the MUX camera. You can move the joy-

stick to view a specific area.

5.

Select 

 to bring up MUX Menu 2. The icons for a picture-in-picture display,

4-camera display, 9-camera display, and 16-camera display appear.

6.

Select 

 to view four of the available 16 cameras on one monitor.

You can cycle through all 16 cameras, four at a time, by repeatedly selecting

.

7.

Select 

 to view nine of the available 16 cameras on one monitor.

Select again to see the remaining seven cameras.

8.

Select 

 to view all 16 available cameras on one monitor.

Figure 43. MUX Control Menu

00934

 does not work on a

9-channel multiplexer.