Pelco Computer Keyboard KBD4000 User Manual

18

Pelco Manual C1921M-G (1/04)

ALARM DURATION
30 SECONDS
1 MINUTE
2 MINUTES
5 MINUTES
10 MINUTES
15 MINUTES

ENABLED +
ENABLED -
DISABLED

*2, 6, or 8 Hr  24 Hr   96 Hr    240 Hr
 12 Hr             48 Hr  120 Hr   360 Hr
 16 Hr             72 Hr  168 Hr   480 Hr
 18 Hr             84 Hr  180 Hr   600 Hr
                                              720 Hr
                                              960 Hr

PELCO
ROBOT
DM

**

**

SEE TABLE C

  *  2/6/8 HR FOR NTSC/EIA MODEL MULTIPLEXERS, 3 HOUR FOR PAL/CCIR MODELS.
     REMAINING RECORD SPEEDS DEPEND UPON VCR MODEL.
 ** NOT SHOWN ON MONOCHROME MODELS.

NORMAL REC. SPEED      2/6/8 Hr
ALARM REC. SPEED         2/6/8 Hr

                                             VCR SETUP

VCR TYPE                          UNIVERSAL
VCR VIDEO FORMAT        COMPOSITE
VCR SWITCH PULSE        DISABLED

                                      ALARM HANDLING

RECORD ALARMS AS A    PRIORTIY
ALARM RECORD TIME      ALARM DURATION

CONFIGURE CUSTOM VCR

PLAYBACK FORMAT          PELCO

AS A PRIORITY
ONLY

Figure 7.  Basic VCR Setting Menu

To program the VCR recording parameters:

1.

Press the MAIN MONITOR key.

2.

Use the number pad to enter the address of the multiplexer (1-16 if the keyboard is
connected to a multiplexer; 1-8 if the keyboard is connected to a server), and then
press the UNIT key.

3.

Press the LIVE/VCR button for about three seconds.

4.

Type the password (3916), if requested. Enter it by pressing each number key
followed each time by the CAM key. The Record Setup menu appears. The currently
selected menu item blinks.

5.

Press the OPEN key to cycle through the options to select the one you want.

Record Speeds
Sets the speed at which the VCR normally records video and at which it records when
there is an alarm(s). Setting the speeds in the System Setup menu also sets the
speeds in the Record Setup and Custom VCR Setup menu.

VCR Type (See Table C)
If your VCR is not listed among the options, do either of the following:

•

Select UNIVERSAL. In the recording speed menu item at the top of the screen,
select an option your VCR will support.

•

Select CUSTOM. Then go to CONFIGURE CUSTOM VCR and press the OPEN
key to go to the Custom VCR Setup menu. The switch interval can be changed
only while in this setting.

VCR Video Format
This feature is not available on monochrome multiplexers. COMPOSITE is standard
video on a coaxial cable. SVHS is higher resolution video on a special cable.