Pelco Computer Keyboard KBD4000 User Manual

Pelco Manual C1921M-G (1/04)

27

You can program two groups of nine cameras each. Both groups can be programmed to
include any nine cameras. 

 is unavailable in simplex record mode.

To program the nine-camera displays:

1.

Press the MAIN MONITOR key.

2.

Use the number pad to enter the multiplexer’s address (1-16 if the keyboard is
connected to a multiplexer; 1-8 if the keyboard is connected to a server), and then
press the UNIT key.

3.

Press the 

 to call up a nine-camera display. If necessary, press the 

 again to

advance to the other nine-camera group.

4.

Press the 

 for about three seconds. A bar appears in the first camera location of

the nine-camera display, indicating that you are in programming mode.

5.

Use the joystick to move to each camera location in the nine-camera display.

6.

When the camera location you desire is highlighted, choose the new camera by
pressing the number key for the desired camera and then pressing the CAM key.

7.

To exit programming mode, use the joystick to move the bar off the screen.

8.

If necessary, repeat steps 1-7 to program another group.

 is unavailable in simplex record mode.

To program the 16-camera display:

1.

Press the MAIN MONITOR key.

2.

Use the number pad to enter the multiplexer’s address (1-16 if the keyboard is
connected to a multiplexer; 1-8 if the keyboard is connected to a server), and then
press the UNIT key.

3.

Press the 

 key to call up the 16-camera display.

4.

Press the 

 key for about three seconds. A bar appears in the first camera location

of the 16-camera display, indicating that you are in programming mode.

5.

Use the joystick to move to each camera location in the 16-camera display.

6.

When the camera location you desire is highlighted, choose the new camera by
pressing the number key for the desired camera and then pressing the CAM key.

7.

To exit programming mode, use the joystick to move the bar off the screen.