Pelco Computer Keyboard KBD4000 User Manual
30
Pelco Manual C1921M-G (1/04)
1. LED DISPLAY Displays the address of the multiplexer
(from 1-16) with which the keyboard is communicating.
2. LIVE/VCR KEY Selects the source of video to display
on the monitor(s). LIVE is live video from the cameras.
VCR is recorded video that is played back from a VCR.
VCR is recorded video that is played back from a VCR.
The simplex multiplexer must be in the record mode to
record video. Check the main monitor screen to see that
it indicates REC. Press the LIVE/VCR key to change
modes.
record video. Check the main monitor screen to see that
it indicates REC. Press the LIVE/VCR key to change
modes.
3. ZOOM KEY Zooms in (2X or 4X) on the displayed
camera. Use the joystick to control the zoom location.
4. PIP KEY Displays on the main monitor a picture-in-
picture insert on top of the full-screen display.
5. FOUR-CAMERA DISPLAY KEY Press once to
display a group of four cameras on the main monitor.
Repeat pressing to display other groups.
Repeat pressing to display other groups.
6. NINE-CAMERA DISPLAY KEY Press once to
display a group of nine cameras on the main monitor.
Press again to display second group.
Press again to display second group.
7. 16-CAMERA DISPLAY KEY Press once to display all
16 cameras on the main monitor.
8. AUXILIARY KEYS Turn receiver auxiliary functions on
and off.
9. PRESET KEY Sends a camera to a preset: Enter the
preset number and then press this key. Also is used for
programming presets.
programming presets.
10. PATTERN KEY Press to begin a pattern. Also is used
to program a pattern.
11. PTZ FUNCTION JOYSTICK Variable-speed, vector-
solving, bi-directional joystick for pan/tilt control. Turbo
pan* is achieved by full joystick deflection in either pan
direction. Twisting head for zoom control. Controls PIP
size and location also.
pan* is achieved by full joystick deflection in either pan
direction. Twisting head for zoom control. Controls PIP
size and location also.
12. VIEW KEY Press and hold to enter program mode for
multiplexer/multiplexer server. Press to view a
multiplexed video signal going to a VCR.
multiplexed video signal going to a VCR.
13. LENS CONTROL KEYS Control camera lens iris and
focus functions.
14. SEQ KEY Starts/stops a sequence.
15. CLEAR KEY Press to clear a numeric entry.
16. CAM KEY Selects a camera: Enter the camera
number and then press this key.
17. NUMBER PAD Enter numbers.
18. MONITOR KEYS Select the main or spot monitor for
viewing individual cameras. A green LED above each
key indicates which monitor is selected.
key indicates which monitor is selected.
19. UNIT KEY Selects the multiplexer with which the
keyboard communicates: Enter the address of the
multiplexer (1-16) and then press this key.
multiplexer (1-16) and then press this key.
Figure 13. KBD4000 Keyboard Definitions
For complete instructions on how to use the keys, refer to Table E, Operation Guide.
1
2
5
7
8
12
9
10
13
11 *
15
16
17
19
18
OPEN
NEAR
FAR
CLOSE
3
4
6
14
LIVE/VCR
MONITOR
UNIT
MAIN
SPOT
SEQ
VIEW
PATTERN PRESET
ON
OFF
KBD4000
1
2
3
4
5
6
7
8
9
0
CLEAR
CAM
MADE IN USA.
*
The turbo pan feature
may be disabled.
Place switch 6 on the
rear panel DIP switch
block in the off posi-
tion. See Figure 1.
may be disabled.
Place switch 6 on the
rear panel DIP switch
block in the off posi-
tion. See Figure 1.
* The turbo pan feature
may be disabled. Place
switch 6 on the rear
panel DIP switch block
in the off position. See
Figure 1.
switch 6 on the rear
panel DIP switch block
in the off position. See
Figure 1.
OPERATION