Troy-Bilt CSV 206 Chipper Shredder Vac User Manual

5. 

Remove the shoulder screws, thrust washers, and bell 

washers that go through the pivot arms to the front 

support brace. The front support brace and lock nut can be 

removed at this time as well.

6. 

Remove the four screws on the upper housing that secure 

the nozzle cover. See Figure 7-3.

Before performing any type of 

maintenance on the machine, wait for all parts to 

stop moving and disconnect the spark plug wire. 

Failure to follow this instruction could result in 

personal injury or property damage.

NOTE: When tipping the unit, empty the oil and fuel tank and 

keep engine spark plug side up.
1. 

Disconnect and ground the spark plug wire to retaining 

post.

2. 

Remove bag assembly or blower chute.

3. 

Remove the three hex cap screws holding the hose hanger 

bracket and chipper chute to the upper housing. See 

Figure 7-1.

4. 

Remove the flange lock nuts, front wheels, and wave 

washers that attach to the pivot arm assemblies. See Figure 

7-2.