Tripp Lite SNMP Solo MT-SE-37/02 User Manual

SNMP Solo Package

5

 

 The SNMP Solo uses this port for configuration during
installation or for communications during normal operations.

 

 Your package contains two 3.5” MIB diskettes—one in DOS
format and one in TAR format. These diskettes contain the UPS
MIB file. Copy the MIB file to the appropriate NMS MIB
directory for the UPS connected to your SNMP Solo.
 
 The DOS disk also contains a copy of the programmed image
file and the downloaded .exe program. See the Upload
Firmware section for further explanation of these files.

 

 Your package contains a cable labeled SM-SER-117A, female-
to-female. Use this cable to connect the SNMP Solo serial port
and a dumb terminal or PC for configuration. When you
configure the SNMP Solo, be sure to set the DIP switch to the
proper setting. Any dumb terminal or terminal emulation
package, such as Microsoft Windows’ Terminal will work fine.

 

 The two types of power supplies offered are:
 

 

 

 

 

Wall Cube

 

120 VAC, 60 Hz

 

9 VDC, 1 amp

 

Universal

 

230 VAC, 50 Hz

 

9 VDC, 1 amp

 WARNING: If you are using a power supply other than the one supplied