Tripp Lite SNMP Solo MT-SE-37/02 User Manual

24

If the SNMP Solo detects three communication
failures in a row, the red LED turns on and
stays on until the SNMP Solo receives a
successful communication from the UPS.

1.  PING SNMP Solo.

Issue a PING command from the NMS. If you do not get a
response, check the SNMP Solo’s network connection and
IP address.

2.  Test the adapter with an NMS.

Perform a “get” command and a “set” command. If either
command fails, check the SNMP Solo access controls. The
manager must have read permission to execute a get
command successfully and read/write permission to
execute a set command successfully.

(See the Configuring the NMS section for a detailed
discussion.)