Trendnet TRENDnet Bluetooth Headset TBW-101UB User Manual

  8

2.  The very first time you use BlueSoleil, the Welcome to Bluetooth screen 

will appear. Assign your Windows system a name and device type, to be 
shown to other Bluetooth enabled devices. In most cases, you should 
leave the security setting checked. Click OK. 

 

Before it can connect, your computer must first detect other Bluetooth 
enabled devices in range. 

1.  Make sure that the Bluetooth enabled device you wish to connect to is 

turned on, with sufficient battery power, and set in discoverable mode. 
Have any necessary passkeys ready. If necessary, you may also need to 
enable the service you want to use on the remote device. Refer to the 
remote device’s user documentation for instructions. 

If you haven’t done so already, you may also want to assign the device a 

Bluetooth name. Refer to the device’s user documentation for instructions. 

2.  In the Main Window, click on the red ball to start the device search. 

Alternatively, you can click My Bluetooth | My Device Inquiry or View | 
Refresh Devices or press F5. 

3.  After a few seconds, an icon will appear around the center ball for each 

Bluetooth enabled device detected within the radio range. 

•  The Main Window can display only eight discovered devices at a time. 

•  To sort the devices by device name, device address, or device type, 

4.  Wait several seconds until BlueSoleil reports the name of each device. 

5.  If the device you want is not listed, make sure that the device is turned on 

and discoverable and try searching again. You have multiple options for 
starting another search: 

 

•  If you start another search by double-clicking on the red ball or clicking