Transition Networks BFFG1XXX-1XX User Manual
Transition Networks
Section lV: FBRM/BFFG Initial Device Setup
USB CLI access
Accessing the
USB CLI
USB CLI
To access the USB CLI, do the following:
Step
Action
1.
Connect the Device to a computer via the USB port.
2.
Activate the terminal emulator software to launch the emulator screen.
3.
Press the ENTER key to bring up the “password” prompt.
4.
Enter the password and then the login (default is “root” in both cases) to
bring up the Device
console> prompt, shown in Figure 28.
Figure 28: Device Console Prompt
5.
To access the commands list, at the
console> prompt type help or “?”
6.
Press the ENTER key to launch the “commands” screen, shown in
Figure 29.
Figure 29: Commands for FBRM/BFFGs Models
Note: See Appendix C for a complete list of the configuration commands and
definitions. All CLI commands are case sensitive.
Continued on next page
Password :
Login : root
Password :
Console:/>_
Login : root
Password :
Console:/>_
24-Hour Technical Support: 1-800-260-1312 International: 00-1-952-941-7600
33