Transition Networks BFFG1XXX-1XX User Manual

Section IV:  FBRM/BFFG Initial Device Setup 

Transition Networks 

  

To set up the IP configuration via DHCP, do the following: 

1. 

  A DHCP server must be on the network and accessible. 

2. 

  On the local switch configuration screen, enable DHCP as shown in Figure 

44. 

 

 

 

3. 

  Click the Local REBOOT button at the top of the screen to start the DHCP 

process. 

 

Note:   To verify that the DHCP IP configuration was successful, check the IP 

configuration for the Device on the local system configuration screen and 
note the changes to the IP configuration. 

 

46