Transition Networks BFFG1XXX-1XX User Manual

T

ransition Networks  

Section lX:  FBRM/BFFG Cable & Fiber Optic Specifications 

  

Cable physical characteristics must meet or exceed IEEE 802.3™ specifications. 

  

Bit Error Rate: 

<10-9 

Single mode fiber: 

9 µm 

Multimode fiber: 

62.5/125 µm 

Multimode fiber: 

100/140, 85/140, 50/125 µm 

  

The following are FBRM10xx-1xx copper-to-fiber connector specifications. 

 

 

CFBRM1011-100 

1300 nm multimode 

SFBRM1011-100 

min: -19.0 dBm max: -14.0 dBm 

Fiber-optic transmitter power: 

min: -30.0 dBm max: -14.0 dBm 

Fiber-optic receiver sensitivity: 

11 dB 

Link budget: 

 

CFBRM1013-100 

1300 nm multimode 

SFBRM1013-100 

min: -19.0 dBm max: -14.0 dBm 

Fiber-optic transmitter power: 

min: -30.0 dBm max: -14.0 dBm 

Fiber-optic receiver sensitivity: 

11 dB  

Link budget: 

 

CFBRM1014-100 

1310 nm single mode 

SFBRM1014-100 

min: -15.0 dBm max: -8.0 dBm 

Fiber-optic transmitter power: 

min: -31.0 dBm max: -8.0 dBm 

Fiber-optic receiver sensitivity: 

16 dB 

Link budget: 

CFBRM1015-100 (long haul) 

 

SFBRM1015-100 (long haul) 

1310 nm single mode 

Fiber-optic transmitter power: 

min: -8.0 dBm  max: -2.0 dBm 

Fiber-optic receiver sensitivity: 

min: -34.0 dBm max: -7.0 dBm 

Link budget: 

26 dB 

 

WARNING:  Visible and invisible laser radiation when open. Do not stare into the 
beam or view the beam directly with optical instruments. Failure to observe this 
warning could result in an eye injury or blindness. 

WARNING:  Use of controls, adjustments or the performance of procedures other 
than those specified herein may result in hazardous radiation exposure. 

 

90

 

 

24-Hour Technical Support:   1-800-260-1312   International: 00-1-952-941-7600