Paradyne Broadband Access Concentrator 8820 User Manual
1. Network Management Specification
72
June 2003
8000-A2-GB30-00
dot3MauType100BaseFXHD, dot3MauType100BaseFXFD, dot3MauType100BaseT2HD,
dot3MauType100BaseT2FD, etc.
dot3MauType100BaseT2FD, etc.
7.4.1.4
ifMauStatus (RO):
The current state of the MAU.
7.4.1.5
ifMauDefaultType (RW):
This object identifies the default administrative baseband MAU type, to be used in
conjunction with the operational MAU type denoted by ifMauType.
conjunction with the operational MAU type denoted by ifMauType.
7.4.1.6
ifMauAutoNegSupported (RO):
This object indicates whether or not auto-negotiation is supported on this MAU.
7.4.1.7
ifMauTypeListBits (RO):
A value that uniquely identifies the set of possible IEEE 802.3 types that the MAU could
be. If auto-negotiation is present on this MAU, this object will map to
ifMauAutoNegCapability. Note that this MAU may be capable of operating as a MAU type
that is beyond the scope of this MIB. This is indicated by returning the bit value bOther
in addition to any bit values for capabilities that are listed above.
be. If auto-negotiation is present on this MAU, this object will map to
ifMauAutoNegCapability. Note that this MAU may be capable of operating as a MAU type
that is beyond the scope of this MIB. This is indicated by returning the bit value bOther
in addition to any bit values for capabilities that are listed above.
All other objects in this table are not supported.
7.5
IP Forwarding Table (RFC 2096)
7.6
Paradyne PDN-MGMT-IP-MIB.
This enterprise MIB contains some objects for configuration and management of Classical
IP ports (also called IP interfaces) that are used for managing a DSLAM device. Using the
objects in this mib, we can managed the DSLAM using either the IP-over-Ethernet or the
IP-over-ATM models. The following MIB objects are supported to accomplish that.
IP ports (also called IP interfaces) that are used for managing a DSLAM device. Using the
objects in this mib, we can managed the DSLAM using either the IP-over-Ethernet or the
IP-over-ATM models. The following MIB objects are supported to accomplish that.
Table 1-83. IP Forwarding Table
Table
Comments
ipCidrRouteNumber
Indicates the actual number of routes in the table
ipCidrRouteEntry
Supported as is