Palm Wi-Fi Card User Manual
Using Your Palm Wi-Fi Card
5
Using Your Palm
®
Wi-Fi
®
Card with the Treo
™
700w Smartphone
CHAPTER 1
1.
Wake up your smartphone’s screen, and then insert the Wi-Fi card
into the expansion card slot.
into the expansion card slot.
2.
Tap Wi-Fi in the title bar.
3.
Select the Settings link.
4.
Select Network Cards
.
5.
Select Add New.
6.
On the General tab, set the following:
•
Network name: Specifies the SSID
provided by the system administrator.
provided by the system administrator.
•
Connects to: Specifies whether this
connection connects to the Internet or
to Work. You may need to select Work to access a corporate
intranet.
connection connects to the Internet or
to Work. You may need to select Work to access a corporate
intranet.
•
This is a device-to-device (ad-hoc) connection: Indicates
whether you’re connecting to another device or to an access
point (network).
whether you’re connecting to another device or to an access
point (network).
7.
Select the Network Key tab, and then set the following:
•
Authentication: Sets the method
used to identify devices that connect
to the network.
used to identify devices that connect
to the network.
— Open: Indicates the network
uses open authentication.
— Shared: Indicates the network
uses shared authentication.
— WPA: Indicates the network is a
WPA network that uses 802.1x
protocols.
protocols.