TP-LINK TL-SC323ON User Manual

 

41 

5.  Once the firmware file was selected, click “Firmware Upgrade” button.   

6.  The upgrade progress information will be displayed. Once the uploading process 

completed, the camera will reboot the system automatically. 

7.  Please wait for timer countdown, and then you can use IP Search to search the camera 

again.  

)

 

The download firmware procedure cannot be interrupted. If the power and/or network connection 
are broken during the download procedure, it will cause serious damage to the camera.   

You are strongly suggested not to upgrade firmware via Wireless LAN due to high error rate 
possibly and don't allow any other clients to access this unit during updating procedure.   

Be aware that you shall not turn off the power during updating the firmware and wait for finish 
message.  

Furthermore, the firmware upgrade procedure is always risky and do not try to upgrade new 
firmware if it’s not necessary.

 

¾

  System Restart: The camera is restarted without changing any of the network settings. It 

means the IP address of the camera will not change after firmware upgrade. 

This device provides 2 modes of video profile. The first one is 1.3 Mega mode which supports 
video resolution up to 1.3 Mega-pixel. Maximum frame rate of this mode is up to 30fps. The 
second one is 720p mode which supports video resolution up to 1280x720 but frame rate can be 
up to 30fps. User only can select either 1.3 Mega or 720p mode to operate the camera. Switching 
1.3 Mega and 720p mode, the device will take time to re-configure system.