TP-LINK TL-WPA4220KIT User Guide
TL-WPA4220/TL-WPA2220
300Mbps AV500/AV200 WiFi Powerline Extender
17
3.4.2 Wireless Security
Selecting Wireless > Wireless Security will enable you to configure wireless security for your wireless
network to protect your data from intruders. The powerline extender provides three security types: WEP,
WPA/WPA2 and WPA-PSK/WPA2-PSK. The default password can be found on the label at the bottom
of the device. Wireless security can be configured on the following screen shown as Figure 3-10.
network to protect your data from intruders. The powerline extender provides three security types: WEP,
WPA/WPA2 and WPA-PSK/WPA2-PSK. The default password can be found on the label at the bottom
of the device. Wireless security can be configured on the following screen shown as Figure 3-10.
Figure 3-10 Wireless Security
Disable Security - Check this radio button to disable wireless security. If disabled, the wireless
stations will be able to connect this device without encryption. It is strongly recommended that you
choose one of the security types to enable security.
choose one of the security types to enable security.
WEP - Select 802.11 WEP security.
Figure 3-11 WEP
Type - You can select one of following types.
Automatic - Select Shared Key or Open System authentication type automatically based
on the wireless station's capability and request.
Shared Key - Select 802.11 Shared Key authentication type.