TP-LINK TL-WPA4220NET Quick Setup Guide
Pow
erline
Quick Installation Guide
More:
To add additional Wi-Fi powerline
device (TL-WPA4220 or others), use the
same setup procedure as the TL-WPA4220.
same setup procedure as the TL-WPA4220.
Wait until the powerline
LED turns on.
LED turns on.
TL-WPA4220
TL-PA4010
Applicable to TL-WPA4220 and its multiple-pack kits
Wi-Fi Powerline Extender
7106504934 REV4.0.1
Set your extender(s) settings to your router’s wireless network name and
password.
password.
4
Done. The extender's wireless
network name and password will
now be the same as your router’s.
now be the same as your router’s.
Note: If Wi-Fi Clone succeeds, relocate the extender to your chosen position. If it fails, use “Customize the
Extender’s Wireless Settings” on the back instead.
Extender’s Wireless Settings” on the back instead.
Unify Your Wireless Network via Wi-Fi Clone (Optional)
3
Press the Wi-Fi Clone button.
Will blink slowly for
a few seconds
a few seconds
2
Press the WPS button.
WPS
WAN
LAN
WPS
WAN
LAN
Plug and Play
Set Up a New Wireless Network
Select Wi-Fi Name (SSID): TP-LINK_123456
Enter Wi-Fi Password: 12345678
Enter Wi-Fi Password: 12345678
Router
WAN LAN
1
2
3
4
Enjoy!
1
Plug in your extender next to your router
(with WPS enabled).
Customized Wireless Network Name:
Customized Wireless Password:
Default Wireless Settings
Model No. TL-WPA4220
Wi-Fi Name(SSID):TP-LINK_123456
Wi-Fi Password:12345678
(This QIG uses the powerline adapter TL-PA4010 as an example to work with TL-WPA4220.)