TP-LINK TG-3269 Quick Setup Guide

 PCI/PCI Express Network Adapter

7106504411    REV2.2.0

(Please select the instructions according to your operating system.  Here we use TF-3239DL as an example to illustrate the installation procedures.)

·  Windows 8       ·  Windows 7       ·  Windows Vista       ·  Windows XP        
 ·  Linux       ·  Windows  2000      ·  Windows 2003 ( TF-3200 only)                              

QIG

Resource CD

PCI/ PCI Express Network Adapter

Steps：

1.  Turn off your computer and unplug the power cord from the computer. 
2.  Open the case. Locate an available PCI/ PCI Express slot and remove its 
      slot cover. Keep the screw.   
3.  Insert your PCI/ PCI Express adapter into the corresponding slot. 
     (The figure above takes PCI adapter for example.)
4.  Secure the adapter with the screw removed in Step 2. 
5.  Close the case and insert the power cord back into the computer.
6.  Turn on your computer.

You may see the Found New Hardware Wizard when 

the adapter is plugged. Please click Cancel.

For Windows XP

Select  Don’t  Search.  I  will  choose  the 

driver to install, and click Next. 

Click Browse ... .

Click OK.

Click Continue Anyway.

Right-click My Computer, and then click 

Manage.

Click 

Have Disk ... . 

Find the right product model and operation 

system in the resource CD directory, choose 

the .inf file, and then click Open.

Click Next.

Insert the TP-LINK Resource CD 

into the CD-ROM drive.

Select 

location[Advanced], and click Next. 

Click Finish to complete the installation.

Open Device Manager. Find your network adapter 

and right-click it; then click Update Driver ... .

For TF-3200, you 

need to refer to 

-T2 for  the 

installation of 

this step.

PCI/ PCI Express Network Adapter