TP-LINK TL-PA2010KIT User Guide

Page of 28
TL-PA2010
AV200 Nano Powerline Adapter
 
5
 
On 
The Ethernet port is connected, but there is no data 
being transferred. 
Blinking  The Ethernet port is transferring data. 
 
Ethernet LED 
Off 
The Ethernet port isn’t connected. 
)
 
Note: 
5 minutes after the device connected to the adapter is turned off, and the adapter will automatically 
switch to the power-saving Mode.
     
2.3 Physical Interface   
There are three physical interfaces on this Powerline Adapter.   
 
Ethernet Port
Pair Button
Power Plug 
Interface 
Description 
Ethernet Port 
A 10/100Mbps Ethernet port for connecting the adapter to the PC or the 
broadband device with a network cable. 
Power Plug* 
A Power Plug for connecting the adapter to a 100V ~ 240V AC power 
socket. 
Pair Button 
Pair buttons are used to secure a powerline network. To secure your 
network, please follow the steps below. Firstly, plug in a new adapter, 
and press its pair button for 1 second; then plug in another adapter and 
press its pair button for 1 second as well. The two buttons should be 
pressed within 2 minutes of each other. After that, wait about 60 seconds 
so that the two adapters can finish connecting.   
*
 The provided power plug may differ from the picture due to different regional power specifications. 
Here we take the EU version of this product as an example.