TP-LINK TL-WPA281 User Manual
TL-WPA281/TL-WPA271
Wireless N Powerline Extender
15
The WPS Configuration Screen of Wireless Adapter
Step 4: Wait for a while until the next screen appears. Click Finish to complete the WPS configuration.
The status LED on the Powerline Extender will light green for five minutes if the device has
been successfully added to the network.
been successfully added to the network.
The WPS Configuration Screen of Wireless Adapter
II. By
PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by
PIN with the following two methods.
PIN with the following two methods.
Method One: Enter the PIN into my Powerline Extender
Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 3-5, then
the following screen will appear.