TP-LINK TL-WPA281 User Manual
TL-WPA281/TL-WPA271
Wireless N Powerline Extender
23
Figure 3-15 WPA-PSK/WPA2-PSK
• Version - You can select one of following versions.
9
Automatic - Select WPA-PSK or WPA2-PSK automatically based on the wireless station's
capability and request.
9
WPA-PSK - Pre-shared key of WPA.
9
WPA2-PSK - Pre-shared key of WPA2.
• Encryption - When you select WPA-PSK or WPA2-PSK for Authentication Type, you can
select either Automatic, TKIP or AES as Encryption.
• PSK Passphrase - Enter a passphrase here.
• Group Key Update Period - Specify the group key update interval in seconds. The value can
be either 0 or at least 30. Enter 0 to disable the update.
Be sure to click the Save button to save your settings on this page.
)
Note:
You will be reminded to reboot the device after clicking the Save button.
3.5.3 Wireless MAC Filtering
Selecting Wireless > Wireless MAC Filtering will allow you to set up some filtering rules to control
wireless stations accessing the device, which depends on the station’s MAC address on the following
screen as shown in Figure 3-16.
wireless stations accessing the device, which depends on the station’s MAC address on the following
screen as shown in Figure 3-16.
Figure 3-16 Wireless MAC Filtering
¾
Wireless MAC Filtering - Click the Enable button to enable the Wireless MAC Address Filtering.
The default setting is disabled.
The default setting is disabled.