Panasonic Attune II User Manual

Page of 37
9
Browser Operation
w
wConnecting the Center Module 
via a PC
1
Launch the PC’s Web browser.
2
Input the Center Module IP address into the 
address bar of the Web browser.
Example)  http://Center Module IP address 
This unit has the following default settings as 
the time of shipment: 
IP address:  192.168.0.50 
Port number:  80 
Protocol: 
http
w
p If the HTTP port number has changed from “80”, input 
[http://Center Module IP address: port number] into 
the [Address bar]. 
Example)  If the port number is set to 8080: 
http://192.168.0.50:8080
Important
3
When a connection has been established 
between the Center Module and the PC, an 
authentication pop-up screen will appear. Input 
the username and password.
The following are the default setting username and 
password: 
Username:  admin 
Password:  12345
w
p If authentication is successful, the operation screen 
will appear.
w
p The IP address of the Center Module can be checked 
on the Center Module screen. For details, refer to the 
Operating Instructions <Installation Guide>.
Note
w
p Be sure to change the username and password to 
ensure that the system is secure. For details, see 
“Configuring server settings” (p. 13).
Important
w
wSetup Instructions
This section describes basic operation procedures to set 
this unit with browser operations.
1
2
1
Input the necessary information into the 
settings.
2
Click the [Set] button.
w
p The settings will not be reflected unless the [Set] 
button is clicked.
w
p Do not click the button repeatedly. Doing so may 
result in the settings being set incorrectly.
Important
WX-CC411_PGQP1741ZA_BG_en.indd   9
2014/01/17   15:17:35