Panasonic Attune Operating Guide

14

Caution: Setup of this product should only be performed by

qualified service personnel or system installers.

■ Opening the Switch

1. Press the power button for 2 seconds or more to turn off

the Order Taker.

2. Unscrew the screw and open the switch compartment.

3. Set the switches.

4. After finishing the setup, replace the cover.

5. Turn on the Order Taker.

■ DIP Switch Setup

An eight-bit DIP switch is provided for system setups. The
initial settings are marked with an asterisk *.
Note: Be sure to turn off the Order Taker in Step 1.

Otherwise, the DIP Switch will not be activated until you
turn the power off and on again.

1. Press the power button for 2 seconds or more to turn off

the Order Taker.

2. Set the switches as follows.

SW#1: This switch selects Auto Talk Lock ON/OFF

ON: Auto Talk Lock ON
OFF: Auto Talk Lock OFF

SW#2: This switch selects the target lane for "SW#1:

Auto Talk Lock".
ON: Lane B
OFF: Lane A

SW#3: This switch selects Direct Lane Select Mode or

Normal.
ON: Direct Lane Select Mode

When double-drive-thru, the T1 button is for lane
A, the T2 button is for lane B.

OFF: Normal

For double-drive-thru, the T2 button is A/B Lane
Selection.

SW#4: This switch selects Talk-Lock or Press-To-Talk

ON: Talk-Lock
OFF: PTT (Press-To-Talk)

SW#5: This switch selects Page-Lock or Press-To-Page.

ON: Page-Lock
OFF: PTP (Press-To-Page)

SW#6, SW#7: This switch selects language of Voice

Prompt.

Unscrew the 
screw and open 
the switch 
compartment.

Press the power button to 
turn off the Order Taker.

1

SW#

2

3

4

5

6

7

8

Auto Talk Lock ON/OFF

Function

Voice Prompt Language Select

Voice Prompt Language Select

ON

ON

OFF*

OFF

Auto Talk Lock LANE

B

A*

T2 Button Setting

Direct Lane Select Normal*

Talk-Lock/Press-To-Talk

Talk-Lock

PTT*

Page-Lock/Press-To-Page

Page-Lock

PTP*

RF Power

Reduce Power

Full Power*

1 2 3 4 5 6 7 8

Initial Setting

ON

OFF

English

Spanish

French

Voice Prompt OFF