Panasonic Attune II Operating Guide

6

Refer installation work to your dealer.
Skill and experience are required for installation 
to avoid risk of fire, electric shock, injury and 
damage.

Do not install or wire during lightning 
storms.
Otherwise fire or electric shock may result.

Avoid placing the product in unstable 
positions.
Failure to observe this may cause the product 
to fall resulting in injury.

Stop operation immediately when some-
thing is wrong with the product.
When smoke goes up from the product or the 
smell of smoke comes from the product, con-
tinued use will result in fire.
Turn off the center module connected with this 
product and contact your dealer.

Do not insert objects inside the product.
If metallic items enter the product, it may cause 
fire or electric shock.
Turn off the center module connected with this 
product and contact your dealer.

Do not attempt to disassemble or modify 
the product.
Otherwise fire or electric shock may result. 
Consult your dealer for repair or inspections.

Match the wire accurately.
Short circuit or improper connection may cause 
fire.

Avoid installing the product in locations 
where it is subject to damage by salt or 
corrosive gas.
Otherwise, the mounting fixtures will deterio-
rate, causing the product to fall and leading to 
accidents.

When installing the product, use the pro-
vided brackets.
Failure to do so may cause the product to fall, 
resulting in injury or accidents.

Conduct periodic inspections.
Rust on the metal parts or screws may cause 
the product to fall resulting in injury. Refer 
inspection to your dealer.

Select an installation surface that can 
support the total weight.
Selecting an inappropriate installation surface 
or method may cause the product to fall or 
topple over, resulting in injury. Contact your 
dealer.

Do not install the product in locations sub-
ject to vibration.
Otherwise the mounting portions will deterio-
rate, causing the product to fall and leading to 
accidents.

Tighten screws and mounting fixtures to 
the specified torque.
Failure to do so may cause the product to fall, 
resulting in injury or accidents. 
Refer installation to your dealer.

Take measures to prevent the product 
from falling.
Failure to do so may cause injury.

If the product displays any abnormalities, 
do not leave the problem unattended.
If left unattended for longer periods of time, 
parts will deteriorate, causing the product to fall 
and leading to accidents.
Refer disassembling to your dealer.

Do not install the product in locations 
where it will become oily.
Otherwise the mounting fixtures will deteriorate, 
causing the product to fall and leading to acci-
dents.