Panasonic Attune II Operating Guide

9

Take safety against falling objects or personnel.

• 

Make sure to turn off the power of the product and of any devices, such as a center module, 

• 

before connection to the product. Failure to observe this may cause electric shock.
Ascertain that other safety controls are implemented as well to ensure that the work is carried 

• 

out safely and reliably.
Do not install the product using mounting fixtures that were deformed due to damage suffered 

• 

during transport or installation, or on a damaged outer wall. This could cause the product to 
fall.

Tighten screws and bolts to the specified torque. Do not overtighten screws and bolts. 

• 

Overtightening will damage the thread and cause the product to fall. If the torque is too low, on 
the other hand, screws and bolts will be loose.
Use a torque driver or torque wrench to maintain the specified torque.

• 

The range of use of torque drivers and torque wrenches is limited. Choose a torque driver or 

• 

torque wrench suitable for the recommended torque value.
Do not use impact drivers or powered screwdrivers as these may damage the screws or bolts.

• 

When tightening a screw or bolt, make it at a right angle to the surface. After tightening the 

• 

screws or bolts, check visually for looseness.

This product is the Speaker Microphone designed for the exclusive order posts to be used in 

• 

combination with the Panasonic Wireless Communication System. The product can be used as 
a speaker or microphone.
While the slim and small-sized shape is compatible with the installation on most of the order 

• 

posts, the product has accomplished the clear sound which can achieve the communication 
even under the engine noise. 
The provided brackets and urethane foams help the flexible mounting and speedy installation. 

•