Panasonic TX-L32E5B Operating Guide
T
uning and Editing Channels
47
Set DVB channel manually [Manual Tuning]
Normally use [Auto Setup] or [Update Channel List] to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
10
[CH21]
474,00 MHz
10
0
0
0
Searching
DVB Manual Tuning
Frequency
Signal Quality
Signal Strength
Signal Strength
No.
Channel Name
Type
New
Free TV: 0
Pay TV: 0
Radio: 0
Data: 0
select
frequency
search
1
Adjust frequency for each channel
2
Search
select channel
adjust frequency
Set where the level of [Signal Quality]
becomes the maximum.
becomes the maximum.
All channels found will be added to the Channel List.
Set Analogue channel manually [Manual Tuning]
[Fine Tuning]: Use to make small adjustments to the tuning of an individual programme (affected by weather
conditions, etc.).
[Manual Tuning]: Set Analogue channel manually after Auto Setup.
If a VCR is connected only with the RF cable, select channel position [0].
Example:
CH33
1 BBC1
Store
CH 1
99
41
H: 21
Analogue Manual Tuning
Manual Tuning
Fine Tuning
1
Select the channel position
2
Select the channel
3
Search
4
Select [Store]
select
store
Update DVB channel automatically [Update Channel List]
You can add new channels, delete removed channels, update channel name and position automatically to the channel
list.
Example:
list.
Example:
CH 21
68
DVB Update Channel List
Progress
This will take about 3 minutes.
CH
Channel Name
Type
Quality
The channel list is updated while keeping your settings in [Favourites Edit],
[Channel List], [Child Lock], etc.
[Channel List], [Child Lock], etc.
Depending on the signal condition, the update may not work properly.
Display a notification message [New Channel Message] (DVB)
Selects whether to give a notification message when a new DVB channel is found.
New channels found!
Press OK to update channel list.
Press EXIT to ignore.
Selecting OK will perform [Update Channel List].
Check DVB signal [Signal Condition]
Selects a channel and checks the DVB signal condition.
A good Signal Strength is not an indication of suitable signal for DVB reception.
Use the Signal Quality indicator as follows.
A good Signal Strength is not an indication of suitable signal for DVB reception.
Use the Signal Quality indicator as follows.
Green bar: Good
Yellow bar: Poor
Red bar: Bad (Check the Terrestrial aerial)
To change the channel
Example:
70 CBBC Channel
0
0
0
9
8
8
0.00E+00
Wenvoe
802,00 MHz [CH62]
Wenvoe
802,00 MHz [CH62]
DVB Signal Condition
Signal Quality
Channel Name
Signal Strength
Bit Error Rate
Network Name
Frequency
Bit Error Rate
Network Name
Frequency
9
8
8
These bars show the maximum signal value of the selected
channel.
channel.
tx_l37_42_47e5b_Eng_2222.indb 47
1/30/2012 11:34:19 AM