Panasonic TC-42PX24 Operating Guide

Do not place any objects on top of the Plasma TV.

If water spills onto the Plasma TV or foreign objects get

inside it, a short-circuit may occur which could result in

fire or electric shock. If any foreign objects get inside the

Plasma TV, please consult an Authorized Service Center.

In the unlikely event that you receive a shock from this

product it is possible that your household outlet may be

wired improperly. Have an electrician verify that the TV’s

outlet is properly wired. If the symptom persists, have the

TV serviced by a qualified authorized technician.

AC Power Supply Cord

To prevent fire or electric shock:

The Plasma TV is designed to operate on a 120 V AC,

60 Hz service. Insert the power cord plug as far as it

will go into the wall socket.

If the plug is not fully inserted, heat may generate, which

could cause a fire.

The included power cord is for use with this unit only.
Do not use any power cord other than that provided

with this TV.

Do not handle the power cord plug with wet hands.
Do not do anything that might damage the power

supply cord.

When disconnecting the power supply cord, hold the

plug, not the cord.

Do not use the power supply cord if the plug or cord is

damaged.

Replace the cord or contact your Authorized Service Center.

Do not use a 3-prong to 2-prong AC plug adaptors to

connect your TV’s plug to the wall outlet.

Doing so will defeat the TV plug’s safety feature, which

can lead to a shock hazard. If the wall outlet does not

accommodate a 3-prong plug, have a qualified electrician

replace your outlet and check the associated wiring.

Handling the power supply cord

Insert the power plug fully into the socket outlet. (If the

power plug is loose, it could generate heat and cause fire.)

Ensure that the power plug is easily accessible.
Ensure the earth pin on the power plug is securely

connected to prevent electrical shock.

• An apparatus with CLASS I construction shall be

connected to a power socket outlet with a protective

earthing connection.

Do not touch the power plug with a wet hand. (This

may cause electrical shock.)

Do not use any power cord other than that provided

with this TV. (This may cause fire or electrical shock.)

Do not damage the power cord. (A damaged cord may

cause fire or electrical shock.)

• Do not move the TV with the cord plugged in the socket

outlet.

• Do not place a heavy object on the cord or place the cord

near a high-temperature object.

• Do not twist the cord, bend it excessively, or stretch it.

• Do not pull on the cord. Hold onto the power plug body

when disconnecting cord.

• Do not use a damaged power plug or socket outlet.

If a problem occurs (such as no picture or no sound),

or if smoke or an abnormal odor is detected from the

Plasma TV, unplug the power supply cord immediately.

Continued use of the TV under these conditions might

cause a fire or permanent damage to the TV. Have the TV

evaluated by an Authorized Service Center. Servicing of the

TV by unauthorized personnel is strongly discouraged due

to its high voltage.

If water or an object gets inside the Plasma TV, if the

Plasma TV is dropped, or if the enclosure becomes

damaged, unplug the power supply cord immediately.

A short-circuit may occur, which could cause a fire. Contact

an Authorized Service Center for an evaluation.

CAUTION

Do not cover the ventilation holes.

Doing so may cause the Plasma TV to overheat, which can

cause a fire or damage to the Plasma TV.

Leave a space of 3 15/16” (10 cm) or more at the top,

left and right, and 2 3/4” (7 cm) or more at the rear.

When using the pedestal, keep the space between the

bottom of the TV and the pedestal or stand surface

clear from objects that may obstruct ventilation.

When Moving the Plasma TV

Be sure to disconnect all cables before moving the

Plasma TV.

Moving the TV with its cables attached might damage the

cables which, in turn, can cause fire or electric shock.

To prevent an electric shock, disconnect the power

plug from the wall outlet as a safety precaution before

carrying out any cleaning.

Transport only in upright position.

Transporting the unit with its display panel facing upward or

downward may cause damage to the internal circuitry.

Using a dry cloth, clean any dust from the power

supply cord and plug regularly.

Build-up of dust on the power cord plug can increase

humidity, which might damage the insulation and cause a

fire.

This Plasma TV radiates infrared rays;

therefore, it may affect other infrared communication

equipment. Install your infrared sensor in a place away from

direct or reflected light from your Plasma TV.

The TV will still consume some power as long as the

power supply cord is connected to the wall outlet.

Display panel is made of glass. Do not apply strong

force or impact to the display panel.

This may cause damage resulting in injury.

The TV is heavy. TV should be handled by 2 or more

people. Support as shown to avoid injury by the TV

tipping or falling.

tc_p42_50_px24_eng_簡易_0576.indb 3

2010/01/21 17:09:40