Panasonic DMR-EZ485VK Operating Guide

Preparation:

 Turn on the unit and connected equipment.
 [RAM] If the disc is protected, release protection

(

52).

 [VHS] Ensure accidental erasure tab is intact.
 When recording multilingual broadcasts ( 23)

DRIVE

SELECT

to select the drive (DVD or

VHS).

Insert a disc or VHS cassette.

REC MODE

to select the recording

mode (

24).

INPUT SELECT

IN1

IN2

Input Select

Recording from an External Device

Recording from a VCR, etc.

Connect cables while the power to both the unit and the
external device is off.

Front of the unit

S VIDEO

IN 2

VIDEO

/MONO AUDIO R

You can get a
sharper, clearer
picture by connecting
with an S Video cable
instead of the yellow
video cable.

Yellow White Red

S Video cable

Audio/video
cable

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
Perform steps 1−5 left.

Start play on an external device.

REC

to start recording the

program from an external device.

PAUSE

to start recording the

program from the external device.

Perform steps 1−5 left.

PLAY

to locate the point on the

tape where you want to insert the
recording.

PAUSE

when you reach that point.

REC

to put the unit in recording

standby.

Start play on the external device.

Recording to VHS

Recording to DVD

Tips

If the external equipment only has a single audio output,

connect it to the L/MONO (white) IN2 terminal.

Tips

To skip unwanted parts
Press [

 PAUSE] to pause recording. (Press again to restart

recording.)

To stop recording
Press [

 STOP].

,  to select “IN1” or “IN2”,

then

– Rear Panel inputs are IN1.

– Front Panel inputs are IN2.

Notes

If video is copied from another piece of equipment to this unit, then
the video quality will be degraded.

You can also connect to the IN1 on the rear.

DMR-EZ48VP.indb 28

2007/12/13 20:42:57