Panasonic DMC-FZ200 Owner's Manual

Page of 220
- 134 -
Recording
Adjusting the picture quality
1
Press 
2/1 to select the type of Photo Style.
2
Press 
3/4 to select the items, and then press 2/1 to adjust.
Registered settings are memorized even if the camera is turned off.
If you adjust the picture quality, [
_] is displayed beside the Photo Style icon on the screen.
Color can be changed by [Saturation] when [Monochrome] is selected.
3
Press 
4 to select [Custom setting] and then press [MENU/SET].
Confirmation screen is displayed. It is executed when [Yes] is selected.
Setting can be registered in [Custom].
Applicable modes: 
This allows you to select the aspect ratio of the pictures to suit printing or the playback method.
Note
The ends of the recorded pictures may be cut at printing so check before printing. 
(P217)
Item
Effect
 [Contrast]
[
r]
Increases the difference between the brightness and the 
darkness in the picture.
[
s]
Decreases the difference between the brightness and the 
darkness in the picture.
 [Sharpness]
[
rThe picture is sharply defined.
[
sThe picture is softly focused.
 [Saturation]
[
rThe colors in the picture become vivid.
[
sThe colors in the picture become natural.
 [Noise Reduction]
[
r]
The noise reduction effect is enhanced. Picture resolution may 
deteriorate slightly.
[
s]
The noise reduction effect is reduced. You can obtain pictures 
with higher resolution.
[Aspect Ratio]
Settings
Description of settings
[X]
[Aspect Ratio] of a 4:3 TV
[Y]
[Aspect Ratio] of a 35 mm film camera
[W]
[Aspect Ratio] of a high-definition TV, etc.
[
]
Square aspect ratio
S