Panasonic Lumix DMC-TZ60 Operating Guide
14
VQT5E64 (ENG)
Charging the battery
• The battery that can be used with this unit is DMW-BCM13E.
• The battery is not charged when the camera is shipped. Charge the
battery before use.
Make sure that the camera is turned off.
Insert the battery to this unit, and then connect this unit to
the AC adaptor (supplied) ( ) or a PC ( )
the AC adaptor (supplied) ( ) or a PC ( )
When charging the camera, connect the USB connection cable
(supplied) to the [AV OUT/DIGITAL] socket (gold terminal).
Connecting the cable to a wrong terminal may cause malfunction.
[AV OUT/DIGITAL] socket
(supplied) to the [AV OUT/DIGITAL] socket (gold terminal).
Connecting the cable to a wrong terminal may cause malfunction.
[AV OUT/DIGITAL] socket
• Place the camera in an upright position, and
find the gold terminal at the bottom.
• Insert the USB connection cable so that its [
] mark will face the [ ]
mark side of the camera.
• Always check the direction of the pins and hold the plug straight to insert
or remove it. (If the cable is inserted in the wrong direction, the pins could
become deformed and cause faulty operation.) Also, do not insert into the
wrong socket. Doing so may cause damage to this unit.
become deformed and cause faulty operation.) Also, do not insert into the
wrong socket. Doing so may cause damage to this unit.
Computer
Getting ready:
Turn on the computer.
Getting ready:
Turn on the computer.
To the electrical outlet
USB connection cable
(supplied)
(supplied)