Toro EC-XTRA Landscape Timer, 6-Zone (53794) Installation Guide

Note:

For each program, you can select Calendar, Inter-

val Odd, Even or Off. To set a Calendar schedule, con-

tinue here. To set an Interval schedule see page 23. To

set an Odd or Even schedule, see page 24. To turn Off a

program, see page 26.

Setting a Calendar Schedule

Turn the control dial to the

watering

days

position.

Check the

programs

switch setting. If necessary,

reposition the switch to select the desired program.

The current watering schedule will be displayed. If

CAL

(Calendar) is not displayed, press the +/

–/

off

button as needed to select CAL.

Press the

next

button. The watering days currently

set for this program will be displayed.

(Sunday)

will begin flashing.

To select Sunday as a watering day, press the +/

button. To remove Sunday from the schedule, press

the –/

off

button;

(Monday) will now begin flash-

ing. Continue to select or remove each day of the

week until only the desired watering days are shown

To set a Calendar schedule for another program,

repeat all of the steps beginning at step .

When you have completed setting the Calendar

schedule for each program (as needed) return the

control dial to the

run

position.

Note:

Each program can have its own Calendar, Inter-

val or Odd/Even schedule, but only one schedule can

be active at a time for that program. The watering day

schedule or OFF shown in the display when the control

dial is in the

watering

days

position, will be the cur-

rent schedule for that program.

Setting the Watering Day Schedule

3 5