Toro EC-XTRA Landscape Timer, 6-Zone (53794) Installation Guide

Manual operation enables the automatic watering pro-

grams or selected zones assigned to the program to be 

started manually. During operation, temporary changes 

can be made to increase or decrease the zone run 

time, step through the zone sequence and pause or 

stop watering using the “Watering Control Features” 

described on page 32. Upon completion of the manual 

watering operation, the timer will return to the Automatic 

mode.
Starting Programs and/or Zones Manually
You may operate all zones or selected zones in each pro-

gram. Watering programs can be started individually or 

set to start in order. When one program finishes the next 

selected program will operate.

  Ensure the control dial is in the 

position.

  Position the 

 switch to select the program 

you wish to start.

  Choose one of the following manual operations:

  •  To operate the selected program with all 

, press the 

  

button two times to begin watering.

 

•  To operate only selected zones, press the  

 button, then press the +/

 button 

to select the flashing zone number, or press the 

 button to skip the zone number. Continue 

selecting or omitting zones in this manner. When 

only the desired zones are displayed, press the 

 button again to begin watering.

   Example: Program A is operating. Zone 1 is on and 

has 10 minutes of run time remaining.  

Program B will start when program A is finished.

4.  To select additional programs, repeat steps and .
   Note: Additional programs set to start will operate 

one at a time in alphabetical order. Each program 

letter will be displayed as it is selected. The program 

currently operating is indicated by the flashing pro-

gram letter.