Toro EC-XTRA Landscape Timer, 6-Zone (53794) Installation Guide

Changes in season and temperature generally require a 

change in zone run time to maintain a healthy landscape  

and conserve water. The Season Adjust feature enables 

you to change the run time of all zones assigned to a 

program, simultaneously up or down, in 10% increments 

– with just the press of a button. Adjustments can be 

reduced to 10% or increased to 200% of the programmed 

run time of each zone.
A 50% setting, for example, would decrease a 20-minute 

zone run time to 10 minutes. Increases however, work 

a little differently. With any adjustment above 100%, the 

ECXTRA will first increase the run time by the adjust-

ment percentage, then split the time in half and run the 

watering program twice. This allows the water to soak 

in instead of pooling or running off. For example, adjust-

ing to 150% would first increase a 20-minute zone run 

time to 30 minutes, then split the time in half and run two 

watering cycles back-to-back with 15 minutes in each 

operation. During operation the % symbol will flash to 

indicate a multiple watering operation.
Note:

 All zone run times are retained in the timer memory 

and returned to their set value when the season adjust is 

reset to 100%. The only time a zone run time will appear 

changed is during operation.

  Turn the control dial to the 

posi-

tion. The season adjust display will be shown and 

100% will be flashing.

  Check the 

 switch setting. If necessary, 

reposition the switch to select the desired program.

  Press the +/

 or –/

 until the desired adjustment 

value is flashing.

 4.  To apply the Season Adjust feature to another pro-

gram, repeat steps and .

  Return the control dial the 

position.

 The Season Adjust symbol will be displayed in 

all dial positions as a reminder that this feature is in use.