Toro Precision Series Rotating Nozzles Product Datasheet

Page of 2
Precision
 Series
Rotating Nozzle
Sprays
Based off the design of the world’s leading gear-driven rotor for 
golf applications, the Precision Series Rotating Nozzle powered 
by its proven planetary gear drive delivers wind-resistant, 
multi-stream, multi-trajectory patterns. Both the full circle and 
adjustable arc models deliver a radius range of 14 to 26 feet 
with exceptional uniformity and outstanding close-in watering, 
preventing the need to extend irrigation cycles to compensate 
for brown spots. The consistent matched precipitation rate of 
0.55 inches per hour helps meet the needs of tight water windows.
Features & Benefits
Gear-Driven
Precision Series Rotating Nozzles utilize a proven planetary gear drive, 
variable stator and turbine to rotate the nozzle. The entire gear package 
is contained in the area beneath the fine mesh filter screen. Particles large 
enough to enter through the filter will exit out of the nozzle plate through 
the multi-streams.
Fewer Models
Precision Series Rotating Nozzles reduce the number of models that need to 
be carried in inventory. Two male-threaded nozzles and two female-threaded 
nozzles are all that are required to cover radius range from 14-26 feet and 
45-360°.
Matched Precipitation Rate of 0.55”/hr.
These nozzles deliver water more slowly and evenly than standard spray 
nozzles. The precipitation rate of 0.55”/hr helps prevent the need to increase 
irrigation run time so much that it is tough to apply all the water needed for 
a given water window.
Consistent Speed of Rotation
The Precision Series Rotating nozzle is not dependent on system pressure like 
competitive models. The gear drive mechanism delivers a consistent speed 
of rotation regardless of system pressure and prevents product stalling at low 
pressure. In addition, the gear drive allows for a wider operating pressure 
range of 20-75 PSI.
Higher Output Torque
The gear drive develops an output power that is 10 times stronger than the 
output torque of competitive units. This ensures positive rotation with no 
slowing caused by environmental factors such as blades of grass or small 
debris pushing up against the nozzle.
Female-threaded
PRN-A
Male-threaded
PRN-TA
Female-threaded
PRN-F
Male-threaded
PRN-TF
EZ ARC™ 
Adjustment Tool