Toshiba Webcam A100 Maintenance Manual

To execute the IEEE 1394Test, use the Test Diagnostics disk (No.4). Finish the tests of the 
Diagnostics disk (No.1) by selecting 99 - EXIT TO DIAGNOSTICS MENU in the 
DIAGNOSTIC TEST MENU. Then in the DIAGNOSTICS MENU, select 9 - EXIT TO MS-
DOS. 

Insert the Test program disk (No.3) in the floppy disk drive and turn on the power. The following 
message will appear: 

******************************************************************** 

*     ---------------------------------------------------------    * 

*                  EEE1394 test menu (For repair)                  * 

*     ---------------------------------------------------------    * 

*   

 

 

 

 

 

 

 

    

 

 

 

 

 

 

 

 

 

       * 

*     =============   Select test NO. and [Enter] =============    * 

*                                                                  * 

*          1 ....Transmit & Receive test                           * 

*          2 ....Responder tool   

 

 

 

                      * 

*          3 ....1394 GUID Display                                 * 

*                                                                  * 

******************************************************************** 

.... Press test number [1-3] ? 

 

Press the number you want to test and press Enter. 

Subtest 01 

Transmit & Receive test 

Specifies the data size and transfer speed between the responder connected with a 
responding cable, and sends and receives data. A dedicated cable for 
I-link is necessary. 

Subtest 02 

Responder tool 

Setting Menu only for receiving in a responding test. 

Subtest 03 

1394 GUID Display 

GUID can be displayed.