Toshiba Webcam A100 Maintenance Manual

To remove the LCD cable, perform the following procedure. (See Figure 4-38.) 

1.  Remove the right side hinge cover (viewing from the front). 

2.  Peel off the acetate tape fixing the LCD cable and two acetate tapes fixing the 

insulator. 

3.  Take the LCD cable out of the hinge hole. 

LCD cable

Hinge cover

Acetate tapes

Acetate tape

 

To install a LCD cable, perform the following procedure. (See Figure 4-38.) 

1.  Pass the LCD cable through the hinge hole, put the cable (to the connector on the 

system board) in the slot guiding the cable at the back.