Toshiba MJ-1103 User Manual
MJ-1103/1104
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DESCRIPTION OF OPERATIONS
3 - 2
• Center-binding mode
Paper is exited following the procedure below when the Saddle Stitch Finisher is installed.
1 The stacker is moved to the stapling position according to the detected paper size.
2 Paper is transported to the stacker and then side alignment operation is performed.
3 The stack of paper is stapled after the alignment for the last page is finished.
4 The stacker is moved to the paper folding position to fold the paper.
5 The paper is transported to the additional folding position to be folded again.
6 The paper is exited to the saddle tray.
1 The stacker is moved to the stapling position according to the detected paper size.
2 Paper is transported to the stacker and then side alignment operation is performed.
3 The stack of paper is stapled after the alignment for the last page is finished.
4 The stacker is moved to the paper folding position to fold the paper.
5 The paper is transported to the additional folding position to be folded again.
6 The paper is exited to the saddle tray.
Fig. 3-3
2
1
3
4
4
5
6
Junction box
Side alignment Unit
Stacker
Stapler unit
Fold unit
EFS unit
Saddle tray