TECNIK Oven User Manual

22

Important installation notes:
❑ Properly dispose of packaging

❑ Do not use oven door handle for trans-

porting or handling the unit during
installation.

❑ WARNING: Connection and first start of

the appliance may only be performed by
an authorised specialist.

❑ Connection must be made using an

H 0 5 V V- F mains connection cable.

❑ Nominal connected loading, nominal

voltage and model number of the
appliance: 
see the rating plate, located behind the
oven door, fixed to the lower left facing
edge of the oven.

❑ The unit's nameplate is located at on

❑ Electrical safety of the appliance can

be ensured only if the equipment earth
in the building installation has been
installed according to regulations.

❑ On the installation side a isolating device

shall be provided.
Any switch with a contact gap ex-
ceeding 3 mm may be considered
a separating device.
Other examples are LS switches, fuses
and contactors.

❑ In the case of repairs interrupt all

power connections to the unit.

❑ Connection diagram

Oven housing units from virtually all lines of
kitchen furniture are suitable for installing
the built-in oven. However, the veneers or
plastic laminates on the housing unit must
be applied with heat-resistant glue (90 °C).
If plastic laminate or glue are not sufficiently
heat-resistant, warping, bubbling or
detachment of the finish may result.

220-240V

~

L

N

Assembly Instructions