Manualsbrain.com
  1. Manuals
  2. Brands
  3. Tascam
  4. DR-22WL
  5. User Manual

Tascam DR-22WL User Manual

Download
Page of 112
TASCAM  DR-22WL
 9
Setting the built-in clock
When the unit is started up for the first time (or after being left 
without batteries), the 
DATE/TIME
 screen appears before 
the start-up screen to allow the date and time to be set.
Press the F4 
 button to move the cursor (highlighted part), 
and use the F2 
 and F3 
 buttons to set the date and time.
When finished setting, press the F1 
 button to return to the 
menu screen. 
Shutting down
While the unit is turned on, slide the HOLD/ 
 switch to the 
 position until 
TASCAM DR-22WL shutting 
down
 appears on the display.
The power turns off in a few seconds.
Connecting monitoring devices and 
headphones
To listen with headphones, connect them to the   /LINE OUT 
jack.
To listen with an external monitoring system (powered monitor 
speakers or an amplifier and speakers), connect it to the   /
LINE OUT jack.
Headphones
Powered monitor speakers  
or  
an amplifier and speakers
Basic menu operation procedures
1.  Press the  /MENU/8 button to open the 
REC
 page 
on the menu screen.
2.  Press the F1 
 button to open menu pages.
3.  Use the F2 
 or F3 
 button to select (highlight) a 
menu item to set.
4.  Press the F4 
 button to show the pop-up setting 
screen.
5.  Use the F2 
 or F3 
 button to change the setting.
6.  Press the F1 
 button to set a different item in the same 
menu page.
7.  Repeat step 2 to 6 as necessary to set other items.
8.  When finished, press the  /MENU/8 button to return 
to the Home Screen.
Menu structure
MENU
REC
Basic settings for recording
TOOL
Convenient functions for playback files
SETUP
Basic settings to make the device easy to 
use
INFORMATION View information
Recording
Recording Screen
The screen below is shown when the unit is in the recording 
standby state or while recording is in progress.
1
  Recording mode
The recording file format, sampling frequency and stereo/
mono (
ST
/
MONO
) status are shown.
2
  Low cut filter on/off status
Blank: Low pass filter off
 : Low pass filter on
3
  Limiter on/off status
Blank: Limiter off
 : Limiter on
4
  Peak reduction on/off status
Blank: Peak reduction off
 : Peak reduction on
5
  Reverb on/off status
Icon
On/off status
Blank
Reverb off
Reverb on (Recording with the effector on)
Reverb on (SEND status)